Opticon M-5 Quick Start Manual

PDF

Document

M-5

Quick Start Guide

Introduction

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store it in a safe place.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused.

Precautions for Use

1. LED Safety

Do not stare into the LED ʼ s.

2. Handling Instructions

【 M-5 】

• Do not attempt to disassemble, modify or update this device.

• Do not use the scanner while operating machinery.

• Do not drop or put heavy items on this product or its cable.

• Do not pinch or forcibly bend the cable, especially at very low temperature.

• Do not insert foreign substances into the device.

• Do not use/leave this device:

- In areas exposed to direct sunlight for long periods of time

- In dusty environments

- In risk for an exposure to chemicals

- Near water or other liquids, as well as in extremely high humidity

- Near heat sources such as radiators, heat registers, stoves, or other types of devices that produce heat

- Near microwaves, medical devices, or RF-emitting devices

- In the reach of blinking lights such as CRT

• Do not use this product during a lightning storm.

【 AC/DC Adapter 】

• Use only the supplied AC adapter with the enclosed region specific plugs for connection to the wall socket.

• This product may produce heat when in use, but it does not affect its performance.

• Do not pull on the cord when unplugging the power cord from a power outlet. Grasp the plug to remove it.

• Do not plug in or out this product with wet hands.

• Unplug this product when it is not in use or when it is being cleaned.

Before Getting Started

■ What's in the Box

Confirm that you have the following items before getting started. Please note that the contents may differ depending on interface specifications. Please contact the nearest dealer if items are damaged or missing.

No.

1 Scanner

Item

2 Interface cable

3 Wedge branch cable

Function

An omnidirectional imaging scanner

A cable for connecting the scanner

Y-cable: The cable that can be used to connect a keyboard and the scanner's straight cable to a host computer.

4 Connector cover

A cover used to fix the connection between the

Y-cable and the straight cable.

5 Instruction of connector cover An instruction manual for the connector cover

6 AC adapter AC adapter with interchangeable plugs

7 Interchangeable plugs

8 Quick start guide

Plugs for different regions

This manual provides the basic product specification and setup instructions.

Notes

Different for each interface spec.

Only for Wedge interface.

Only for M-5-WEDGE+PS package.

Only for RS-232C and Wedge interface.

Overview

■ M-5 Basic Specifications

Operation

Section

Parameter

Physical

Features

Specifications

Size

Weight

(H)140.0 × (W)92.0 × (D)95.5 mm

Approx.295g (excluding the cable)

Scan Conﬁrmation Buzzer and 3 colors LED(Green/Blue/Orange)

Keys 2 keys (Trigger Switch/Mode Switch)

Interfaces RS-232C

Control

Section

Scanning

Section

USB

9600bps 〜 115.2kbps

Full-Speed 12Mbps(HID/VCP)

Hi-Power Bus-powered

PS/2 Keyboard (Connect or disconnect the keyboard.) Wedge

ASIC OEY-0603 CPU:ARM-1026EJ-S Core:160MHz

SDRAM 128Mbits(1M × 4Banks × 32Bits)

Flash ROM 16Mbits(1M × 16Bits) Flash Memory

Light Source

Wavelength

8-AllnGaP Red LEDs(Omniscan Mode)/625nm

4-AllnGaP red LEDs (Mobile Mode)/633nm

Scanning Method WVGA(752 x 480 pixels) CMOS area sensor

Power

Supply

Section

Supported

Symbologies

(1D)

Supported

Symbologies

(2D)

UPC-A,UPC-E, UPC-E1, UPC-A Add-on, UPC-E Add-on, EAN-13,

EAN-8, EAN-13 Add-on/EAN-8 Add-on, JAN-8 , JAN-13, Code

39,Tri-Optic, NW-7, Industrial 2 of 5, Interleaved 2 of 5, Code 93,

Code 128, GS1-128, S-Code, MSI/Plessey, UK/Plessey, TELEPEN,

Matrix 2 of 5, Chinese Post Matrix 2 of 5, IATA,Code 11,

Korean Postal Authority code , GS1 DataBar, Postal Code

PDF417,MicroPDF417,QR Code,MicroQR Code,Data

Matrix (ECC 000-140/ECC 200),MaxiCode (Modes 2 to 5),

Aztec Code, EAN.UCC Composite bar code, Codablock F

Operating voltage 4.5 to 6.6V

USB RS-232C, Wedge

Current consumption

Peak

(when scanning and decoding)

Average

(when scanning and decoding)

Stand-by

420mA 400mA

280mA (typ) 210mA (typ)

140mA (typ) 130mA (typ)

Durability Operating Temp.

0 to 40 deg. C

Storage Temp.

− 40 to 70 deg. C

Operating Humidity 5 to 95 ％ (non-condensing)

Storage Humidity 5 to 95 ％ (non-condensing)

Ambient

Light

Immunity

Fluorescent ： 10,000lx or less

Incandescent lamp ： 10,000lx or less

Sunlight ： 50,000lx or less ( * 1)

Dust-and-Drip Proof IP52

Static Electricity 15kV (no destruction)

Shock

Endurance

Dropped once from each of 5 angles onto concrete ﬂoor from a height of 150cm with no defects found. (Total 5 times)

(*1)Except “ Mobile phone scanning mode ” in each condition. Please note that scanning while the

LCD screen is exposed to direct sunlight may have a negative eﬀect on the reading performance.

■ Detailed View

⑦

⑥

①

⑤ ④

③

②

⑤

⑥

⑦

No.

①

②

③

④

Part

Optical Window

Function

Trigger Switch

Mode Switch

Indicator LED

Indicator LED While Mobile phone scanning Mode

Buzzer Holes

The trigger switch is used for the manual scanning operation. A single aiming guide will be activated in this mode.

The mode switch toggles between Mobile phone scanning mode and Normal scanning mode.

Green LED light shows the scanning operation has been successful.

Blue LED light shows when the scanner is ready to scan.

Orange LED light shows when the scanner is ready for mobile code scanning.

Screw Holes

Used to mount the scanner onto a base plate, wall etc. using D4 (diameter: 4mm) screws.

■ Various Scanning Modes

The following modes are available for different uses:

□ Normal scanning mode

A mode in which the scanner is configured optimally for general barcode reading. The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning.

□ Mobile phone scanning mode

A special mode ― in which the lighting conditions are optimized for reading barcodes, ― displayed on mobile devices such as a phone.

The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning.

□ Single line scanning

While the trigger switch is pressed, the illumination LEDs turn on and only one code can be read. The single line can read one target code out of multiple printed codes in this mode.

■ Basic Specifications for Universal AC adapter

Physical

Features

Parameter

Size

Specifications

(H)75 x (W)47.5 x (D)28mm (excluding boss)

Cable Length 1.8m

Colour Black

Input Power Voltage AC 90V to 265V

Supply Current 500mA Max

Output

Environmental

Speciﬁcation

Power Voltage 5.7V to 6.3V

Maximum Current 2A Max

Operating Temp.

0 to 40 deg. C

Operating Humidity 25 to 85% (non-condensing)

Storage Temp.

− 20 to 60 deg. C

Storage Humidity 20 to 90% (non-condensing)

Power

Normal scanning mode

Mode Switch

Finished Scanning or Time-Out

Mobile phone scanning mode

Figure 1. Scanning mode diagram

Trigger

Switch

Trigger

Switch

Single line scanning

Finished Scanning or Time-Out

The M-5 can be configured by reading the menu codes below. Read more about configuration options

(by Opticonfigure) on www.opticon.com.

: Default

Default Setting

■ Enable QR Code

(* Use this only when “ Disable QR Code ” is set in advance.)

Start / END: ZZ

Read Time Setting

You can set the time that the scanner will try to read a code after it is detected by the auto trigger. This can be set for “ Normal scanning mode ” and “ Mobile phone scanning mode ” .

For single line scanning, it can be set as the LED aiming time.

■ Normal scanning mode

Serial command : Y0 (0.5s) Serial command : Y2 (2.0s)

Enable QR Code: BCD

Multiple read reset time Setting

The time that a code will not be read after it is read successful once can be set. This can prevent the double read of a code.

■ Multiple read reset time

AJ (200ms) Serial command : E9H (700ms)

Auto Trigger Setting

Auto trigger ON / OFF can be set. When it is set to OFF, only the trigger switch can be used to activate the scanner.

■ Auto Trigger ON

Serial command : +I

Serial command : AK (300ms) Serial command : E9I (800ms)

■ Auto Trigger OFF

Serial command : +F

Stop / END: ZZ

Serial command : Y1 (1.0s) Serial command : Y3 (3.0s)

Serial command : AL (400ms) Serial command : E9J (900ms)

■ Back to default

Serial command : U2, C01, SU, UB

■ Mobile phone scanning mode

Serial command : E91 (1s) Serial command : E93 (3s)

Serial command : AM (500ms) Serial command : E8T (1s)

Scanning Mode Setting

"Normal scanning mode" or "Mobile phone scanning mode" can be selected as primary mode when the scanner starts up.

■ Normal scanning mode

Serial command : E8Y

Serial command : E92 (2s) Serial command : E94 (4s)

■ Single line scanning

Serial command : E8V (1s) Serial command : E8X (5s)

■ Mobile phone scanning mode

Serial command : E8Z

Serial command : E8W (3s)

Serial command : AN (600ms) Serial command : AG (Infinity)

Contact

Please contact OPTICON or your local dealer.

The Netherlands

U.S.A.

France

Germany

Italy

Spain

Opticon Sensors Europe B.V.

tel: +31 (0)23-5692700

Opticon Inc.

tel: 800-636-0090 /

Opticon Sensores S.L.

tel: +34 (0)902-747469

/ email: [email protected]

email: [email protected]

Opticon S.A.S.

tel: +33 (0)1-41461260 / email: [email protected]

Opticon Sensoren GmbH tel: +49 (0)6074-91890-0 / email: [email protected]

Opticon s.r.l.

tel: +39 (0)051-6321800 / email: [email protected]

/ email: [email protected]

Sweden

United Kingdom

Taiwan

China

Australia

Brazil

Opticon Sensors Nordic AB tel: +46 (0)8-58548560 /

Opticon Limited tel: +44 (0)1582-635100 email: [email protected]

/ email: [email protected]

Opticon Far Eastern Ltd.

tel: +886 2-27597444 / email: [email protected]

Opticon Sensors Europe B.V., Shanghai Representative Office tel: +86 21-64480881 / email: [email protected]

Opticon Sensors Pty. Ltd.

tel: +61 (0)2-43402666 / email: [email protected]

Opticon Sensors Europe B.V., Latin American Office tel: +55 11-5081 2088 / email: [email protected]

More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.

M-500009062-0-00

M-5

Quick Start Guide

Introduction

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store it in a safe place.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused.

Precautions for Use

1. LED Safety

Do not stare into the LED ʼ s.

2. Handling Instructions

【 M-5 】

• Do not attempt to disassemble, modify or update this device.

• Do not use the scanner while operating machinery.

• Do not drop or put heavy items on this product or its cable.

• Do not pinch or forcibly bend the cable, especially at very low temperature.

• Do not insert foreign substances into the device.

• Do not use/leave this device:

- In areas exposed to direct sunlight for long periods of time

- In dusty environments

- In risk for an exposure to chemicals

- Near water or other liquids, as well as in extremely high humidity

- Near heat sources such as radiators, heat registers, stoves, or other types of devices that produce heat

- Near microwaves, medical devices, or RF-emitting devices

- In the reach of blinking lights such as CRT

• Do not use this product during a lightning storm.

【 AC/DC Adapter 】

• Use only the supplied AC adapter with the enclosed region specific plugs for connection to the wall socket.

• This product may produce heat when in use, but it does not affect its performance.

• Do not pull on the cord when unplugging the power cord from a power outlet. Grasp the plug to remove it.

• Do not plug in or out this product with wet hands.

• Unplug this product when it is not in use or when it is being cleaned.

Before Getting Started

■ What's in the Box

No.

1 Scanner

Item

2 Interface cable

3 Wedge branch cable

Function

An omnidirectional imaging scanner

A cable for connecting the scanner

Y-cable: The cable that can be used to connect a keyboard and the scanner's straight cable to a host computer.

4 Connector cover

A cover used to fix the connection between the

Y-cable and the straight cable.

5 Instruction of connector cover An instruction manual for the connector cover

6 AC adapter AC adapter with interchangeable plugs

7 Interchangeable plugs

8 Quick start guide

Plugs for different regions

This manual provides the basic product specification and setup instructions.

Notes

Different for each interface spec.

Only for Wedge interface.

Only for M-5-WEDGE+PS package.

Only for RS-232C and Wedge interface.

Overview

■ M-5 Basic Specifications

Operation

Section

Parameter

Physical

Features

Specifications

Size

Weight

(H)140.0 × (W)92.0 × (D)95.5 mm

Approx.295g (excluding the cable)

Scan Conﬁrmation Buzzer and 3 colors LED(Green/Blue/Orange)

Keys 2 keys (Trigger Switch/Mode Switch)

Interfaces RS-232C

Control

Section

Scanning

Section

USB

9600bps 〜 115.2kbps

Full-Speed 12Mbps(HID/VCP)

Hi-Power Bus-powered

PS/2 Keyboard (Connect or disconnect the keyboard.) Wedge

ASIC OEY-0603 CPU:ARM-1026EJ-S Core:160MHz

SDRAM 128Mbits(1M × 4Banks × 32Bits)

Flash ROM 16Mbits(1M × 16Bits) Flash Memory

Light Source

Wavelength

8-AllnGaP Red LEDs(Omniscan Mode)/625nm

4-AllnGaP red LEDs (Mobile Mode)/633nm

Scanning Method WVGA(752 x 480 pixels) CMOS area sensor

Power

Supply

Section

Supported

Symbologies

(1D)

Supported

Symbologies

(2D)

UPC-A,UPC-E, UPC-E1, UPC-A Add-on, UPC-E Add-on, EAN-13,

EAN-8, EAN-13 Add-on/EAN-8 Add-on, JAN-8 , JAN-13, Code

39,Tri-Optic, NW-7, Industrial 2 of 5, Interleaved 2 of 5, Code 93,

Code 128, GS1-128, S-Code, MSI/Plessey, UK/Plessey, TELEPEN,

Matrix 2 of 5, Chinese Post Matrix 2 of 5, IATA,Code 11,

Korean Postal Authority code , GS1 DataBar, Postal Code

PDF417,MicroPDF417,QR Code,MicroQR Code,Data

Matrix (ECC 000-140/ECC 200),MaxiCode (Modes 2 to 5),

Aztec Code, EAN.UCC Composite bar code, Codablock F

Operating voltage 4.5 to 6.6V

USB RS-232C, Wedge

Current consumption

Peak

(when scanning and decoding)

Average

(when scanning and decoding)

Stand-by

420mA 400mA

280mA (typ) 210mA (typ)

140mA (typ) 130mA (typ)

Durability Operating Temp.

0 to 40 deg. C

Storage Temp.

− 40 to 70 deg. C

Operating Humidity 5 to 95 ％ (non-condensing)

Storage Humidity 5 to 95 ％ (non-condensing)

Ambient

Light

Immunity

Fluorescent ： 10,000lx or less

Incandescent lamp ： 10,000lx or less

Sunlight ： 50,000lx or less ( * 1)

Dust-and-Drip Proof IP52

Static Electricity 15kV (no destruction)

Shock

Endurance

Dropped once from each of 5 angles onto concrete ﬂoor from a height of 150cm with no defects found. (Total 5 times)

(*1)Except “ Mobile phone scanning mode ” in each condition. Please note that scanning while the

LCD screen is exposed to direct sunlight may have a negative eﬀect on the reading performance.

■ Detailed View

⑦

⑥

①

⑤ ④

③

②

⑤

⑥

⑦

No.

①

②

③

④

Part

Optical Window

Function

Trigger Switch

Mode Switch

Indicator LED

Indicator LED While Mobile phone scanning Mode

Buzzer Holes

The trigger switch is used for the manual scanning operation. A single aiming guide will be activated in this mode.

The mode switch toggles between Mobile phone scanning mode and Normal scanning mode.

Green LED light shows the scanning operation has been successful.

Blue LED light shows when the scanner is ready to scan.

Orange LED light shows when the scanner is ready for mobile code scanning.

Screw Holes

Used to mount the scanner onto a base plate, wall etc. using D4 (diameter: 4mm) screws.

■ Various Scanning Modes

The following modes are available for different uses:

□ Normal scanning mode

□ Mobile phone scanning mode

A special mode ― in which the lighting conditions are optimized for reading barcodes, ― displayed on mobile devices such as a phone.

The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning.

□ Single line scanning

While the trigger switch is pressed, the illumination LEDs turn on and only one code can be read. The single line can read one target code out of multiple printed codes in this mode.

■ Basic Specifications for Universal AC adapter

Physical

Features

Parameter

Size

Specifications

(H)75 x (W)47.5 x (D)28mm (excluding boss)

Cable Length 1.8m

Colour Black

Input Power Voltage AC 90V to 265V

Supply Current 500mA Max

Output

Environmental

Speciﬁcation

Power Voltage 5.7V to 6.3V

Maximum Current 2A Max

Operating Temp.

0 to 40 deg. C

Operating Humidity 25 to 85% (non-condensing)

Storage Temp.

− 20 to 60 deg. C

Storage Humidity 20 to 90% (non-condensing)

Power

Normal scanning mode

Mode Switch

Finished Scanning or Time-Out

Mobile phone scanning mode

Figure 1. Scanning mode diagram

Trigger

Switch

Trigger

Switch

Single line scanning

Finished Scanning or Time-Out

The M-5 can be configured by reading the menu codes below. Read more about configuration options

(by Opticonfigure) on www.opticon.com.

: Default

Default Setting

■ Enable QR Code

(* Use this only when “ Disable QR Code ” is set in advance.)

Start / END: ZZ

Read Time Setting

You can set the time that the scanner will try to read a code after it is detected by the auto trigger. This can be set for “ Normal scanning mode ” and “ Mobile phone scanning mode ” .

For single line scanning, it can be set as the LED aiming time.

■ Normal scanning mode

Serial command : Y0 (0.5s) Serial command : Y2 (2.0s)

Enable QR Code: BCD

Multiple read reset time Setting

The time that a code will not be read after it is read successful once can be set. This can prevent the double read of a code.

■ Multiple read reset time

AJ (200ms) Serial command : E9H (700ms)

Auto Trigger Setting

Auto trigger ON / OFF can be set. When it is set to OFF, only the trigger switch can be used to activate the scanner.

■ Auto Trigger ON

Serial command : +I

Serial command : AK (300ms) Serial command : E9I (800ms)

■ Auto Trigger OFF

Serial command : +F

Stop / END: ZZ

Serial command : Y1 (1.0s) Serial command : Y3 (3.0s)

Serial command : AL (400ms) Serial command : E9J (900ms)

■ Back to default

Serial command : U2, C01, SU, UB

■ Mobile phone scanning mode

Serial command : E91 (1s) Serial command : E93 (3s)

Serial command : AM (500ms) Serial command : E8T (1s)

Scanning Mode Setting

"Normal scanning mode" or "Mobile phone scanning mode" can be selected as primary mode when the scanner starts up.

■ Normal scanning mode

Serial command : E8Y

Serial command : E92 (2s) Serial command : E94 (4s)

■ Single line scanning

Serial command : E8V (1s) Serial command : E8X (5s)

■ Mobile phone scanning mode

Serial command : E8Z

Serial command : E8W (3s)

Serial command : AN (600ms) Serial command : AG (Infinity)

Contact

Please contact OPTICON or your local dealer.

The Netherlands

U.S.A.

France

Germany

Italy

Spain

Opticon Sensors Europe B.V.

tel: +31 (0)23-5692700

Opticon Inc.

tel: 800-636-0090 /

Opticon Sensores S.L.

tel: +34 (0)902-747469

/ email: [email protected]

email: [email protected]

Opticon S.A.S.

tel: +33 (0)1-41461260 / email: [email protected]

Opticon Sensoren GmbH tel: +49 (0)6074-91890-0 / email: [email protected]

Opticon s.r.l.

tel: +39 (0)051-6321800 / email: [email protected]

/ email: [email protected]

Sweden

United Kingdom

Taiwan

China

Australia

Brazil

Opticon Sensors Nordic AB tel: +46 (0)8-58548560 /

Opticon Limited tel: +44 (0)1582-635100 email: [email protected]

/ email: [email protected]

Opticon Far Eastern Ltd.

tel: +886 2-27597444 / email: [email protected]

Opticon Sensors Europe B.V., Shanghai Representative Office tel: +86 21-64480881 / email: [email protected]

Opticon Sensors Pty. Ltd.

tel: +61 (0)2-43402666 / email: [email protected]

Opticon Sensors Europe B.V., Latin American Office tel: +55 11-5081 2088 / email: [email protected]

More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.

M-500009062-0-00

M-5

Quick Start Guide

Introduction

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store it in a safe place.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused.

Precautions for Use

1. LED Safety

Do not stare into the LED ʼ s.

2. Handling Instructions

【 M-5 】

• Do not attempt to disassemble, modify or update this device.

• Do not use the scanner while operating machinery.

• Do not drop or put heavy items on this product or its cable.

• Do not pinch or forcibly bend the cable, especially at very low temperature.

• Do not insert foreign substances into the device.

• Do not use/leave this device:

- In areas exposed to direct sunlight for long periods of time

- In dusty environments

- In risk for an exposure to chemicals

- Near water or other liquids, as well as in extremely high humidity

- Near heat sources such as radiators, heat registers, stoves, or other types of devices that produce heat

- Near microwaves, medical devices, or RF-emitting devices

- In the reach of blinking lights such as CRT

• Do not use this product during a lightning storm.

【 AC/DC Adapter 】

• Use only the supplied AC adapter with the enclosed region specific plugs for connection to the wall socket.

• This product may produce heat when in use, but it does not affect its performance.

• Do not pull on the cord when unplugging the power cord from a power outlet. Grasp the plug to remove it.

• Do not plug in or out this product with wet hands.

• Unplug this product when it is not in use or when it is being cleaned.

Before Getting Started

■ What's in the Box

No.

1 Scanner

Item

2 Interface cable

3 Wedge branch cable

Function

An omnidirectional imaging scanner

A cable for connecting the scanner

Y-cable: The cable that can be used to connect a keyboard and the scanner's straight cable to a host computer.

Connector cover

Quick start guide

A cover used to fix the connection between the

Y-cable and the straight cable.

5 Instruction of connector cover An instruction manual for the connector cover

6 AC adapter AC adapter with interchangeable plugs

7 Interchangeable plugs Plugs for different regions

This manual provides the basic product specification and setup instructions.

Notes

Different for each interface spec.

Only for Wedge interface.

Only for M-5-WEDGE+PS package.

Only for RS-232C and Wedge interface.

Overview

■ M-5 Basic Specifications

Parameter

Physical

Features

Size

Weight

Operation

Section

Interfaces RS-232C

USB

Specifications

(H)140.0 × (W)92.0 × (D)95.5 mm

Approx.295g (excluding the cable)

Scan Conﬁrmation Buzzer and 3 colors LED(Green/Blue/Orange)

Keys 2 keys (Trigger Switch/Mode Switch)

9600bps 〜 115.2kbps

Full-Speed 12Mbps(HID/VCP)

Hi-Power Bus-powered

Control

Section

Scanning

Section

Power

Supply

Section

Wedge PS/2 Keyboard (Connect or disconnect the keyboard.)

ASIC

SDRAM

OEY-0603 CPU:ARM-1026EJ-S Core:160MHz

128Mbits(1M × 4Banks × 32Bits)

Flash ROM 16Mbits(1M × 16Bits) Flash Memory

Light Source

Wavelength

8-AllnGaP Red LEDs(Omniscan Mode)/625nm

4-AllnGaP red LEDs (Mobile Mode)/633nm

Scanning Method WVGA(752 x 480 pixels) CMOS area sensor

Supported

Symbologies

(1D)

UPC-A,UPC-E, UPC-E1, UPC-A Add-on, UPC-E Add-on, EAN-13,

EAN-8, EAN-13 Add-on/EAN-8 Add-on, JAN-8 , JAN-13, Code

39,Tri-Optic, NW-7, Industrial 2 of 5, Interleaved 2 of 5, Code 93,

Code 128, GS1-128, S-Code, MSI/Plessey, UK/Plessey, TELEPEN,

Matrix 2 of 5, Chinese Post Matrix 2 of 5, IATA,Code 11,

Korean Postal Authority code , GS1 DataBar, Postal Code

Supported

Symbologies

(2D)

PDF417,MicroPDF417,QR Code,MicroQR Code,Data

Matrix (ECC 000-140/ECC 200),MaxiCode (Modes 2 to 5),

Aztec Code, EAN.UCC Composite bar code, Codablock F

Operating voltage 4.5 to 6.6V

USB RS-232C, Wedge

Current consumption

Peak

(when scanning and decoding)

Average

(when scanning and decoding)

Stand-by

420mA 400mA

280mA (typ) 210mA (typ)

140mA (typ) 130mA (typ)

Durability Operating Temp.

0 to 40 deg. C

Storage Temp.

− 40 to 70 deg. C

Operating Humidity 5 to 95 ％ (non-condensing)

Storage Humidity 5 to 95 ％ (non-condensing)

Ambient

Light

Immunity

Fluorescent ： 10,000lx or less

Incandescent lamp ： 10,000lx or less

Sunlight ： 50,000lx or less ( * 1)

Dust-and-Drip Proof IP52

Static Electricity 15kV (no destruction)

Shock

Endurance

Dropped once from each of 5 angles onto concrete ﬂoor from a height of 150cm with no defects found. (Total 5 times)

(*1)Except “ Mobile phone scanning mode ” in each condition. Please note that scanning while the

LCD screen is exposed to direct sunlight may have a negative eﬀect on the reading performance.

■ Detailed View

No.

①

②

③

④

⑤

⑥

⑦

⑥

①

⑤ ④

③

②

Part

Optical Window

Function

Trigger Switch

Mode Switch

Indicator LED

Indicator LED While Mobile phone scanning Mode

Buzzer Holes

The trigger switch is used for the manual scanning operation. A single aiming guide will be activated in this mode.

The mode switch toggles between Mobile phone scanning mode and Normal scanning mode.

Green LED light shows the scanning operation has been successful.

Blue LED light shows when the scanner is ready to scan.

Orange LED light shows when the scanner is ready for mobile code scanning.

Screw Holes

Used to mount the scanner onto a base plate, wall etc. using D4 (diameter: 4mm) screws.

■ Various Scanning Modes

The following modes are available for different uses:

□ Normal scanning mode

□ Mobile phone scanning mode

A special mode ― in which the lighting conditions are optimized for reading barcodes, ― displayed on mobile devices such as a phone.

The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning.

□ Single line scanning

While the trigger switch is pressed, the illumination LEDs turn on and only one code can be read. The single line can read one target code out of multiple printed codes in this mode.

■ Basic Specifications for Universal AC adapter

Physical

Features

Parameter

Size

Cable Length

Specifications

(H)75 x (W)47.5 x (D)28mm (excluding boss)

1.8m

Input

Colour Black

Power Voltage AC 90V to 265V

Output

Supply Current 500mA Max

Power Voltage 5.7V to 6.3V

Maximum Current 2A Max

Environmental

Speciﬁcation

Operating Temp.

0 to 40 deg. C

Operating Humidity 25 to 85% (non-condensing)

Storage Temp.

− 20 to 60 deg. C

Storage Humidity 20 to 90% (non-condensing)

Power

Normal scanning mode

Mode Switch

Finished Scanning or Time-Out

Mobile phone scanning mode

Figure 1. Scanning mode diagram

Trigger

Switch

Trigger

Switch

Single line scanning

Finished Scanning or Time-Out

The M-5 can be configured by reading the menu codes below. Read more about configuration options

(by Opticonfigure) on www.opticon.com.

: Default

Default Setting

■ Enable QR Code

(* Use this only when “ Disable QR Code ” is set in advance.)

Start / END: ZZ

Read Time Setting

You can set the time that the scanner will try to read a code after it is detected by the auto trigger. This can be set for “ Normal scanning mode ” and “ Mobile phone scanning mode ” .

For single line scanning, it can be set as the LED aiming time.

■ Normal scanning mode

Serial command : Y0 (0.5s) Serial command : Y2 (2.0s)

Enable QR Code: BCD

Multiple read reset time Setting

The time that a code will not be read after it is read successful once can be set. This can prevent the double read of a code.

■ Multiple read reset time

AJ (200ms) Serial command : E9H (700ms)

Auto Trigger Setting

Auto trigger ON / OFF can be set. When it is set to OFF, only the trigger switch can be used to activate the scanner.

■ Auto Trigger ON

Serial command : +I

Serial command : AK (300ms) Serial command : E9I (800ms)

■ Auto Trigger OFF

Serial command : +F

Stop / END: ZZ

Serial command : Y1 (1.0s) Serial command : Y3 (3.0s)

Serial command : AL (400ms) Serial command : E9J (900ms)

■ Back to default

Serial command : U2, C01, SU, UB

■ Mobile phone scanning mode

Serial command : E91 (1s) Serial command : E93 (3s)

Serial command : AM (500ms) Serial command : E8T (1s)

Scanning Mode Setting

"Normal scanning mode" or "Mobile phone scanning mode" can be selected as primary mode when the scanner starts up.

■ Normal scanning mode

Serial command : E8Y

Serial command : E92 (2s) Serial command : E94 (4s)

■ Single line scanning

Serial command : E8V (1s) Serial command : E8X (5s)

■ Mobile phone scanning mode

Serial command : E8Z

Serial command : E8W (3s)

Serial command : AN (600ms) Serial command : AG (Infinity)

Contact

Please contact OPTICON or your local dealer.

The Netherlands

U.S.A.

France

Germany

Italy

Spain

Opticon Sensors Europe B.V.

tel: +31 (0)23-5692700

Opticon Inc.

tel: 800-636-0090 /

/ email: [email protected]

email: [email protected]

Opticon S.A.S.

tel: +33 (0)1-41461260 / email: [email protected]

Opticon Sensoren GmbH tel: +49 (0)6074-91890-0 / email: [email protected]

Opticon s.r.l.

tel: +39 (0)051-6321800 / email: [email protected]

Opticon Sensores S.L.

tel: +34 (0)902-747469 / email: [email protected]

Sweden

United Kingdom

Taiwan

China

Australia

Brazil

Opticon Sensors Nordic AB tel: +46 (0)8-58548560 /

Opticon Limited tel: +44 (0)1582-635100 email: [email protected]

/ email: [email protected]

Opticon Far Eastern Ltd.

tel: +886 2-27597444 / email: [email protected]

Opticon Sensors Europe B.V., Shanghai Representative Office tel: +86 21-64480881 / email: [email protected]

Opticon Sensors Pty. Ltd.

tel: +61 (0)2-43402666 / email: [email protected]

Opticon Sensors Europe B.V., Latin American Office tel: +55 11-5081 2088 / email: [email protected]

More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.

M-500009062-0-00

M-5

Quick Start Guide

Introduction

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store it in a safe place.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused.

Precautions for Use

1. LED Safety

Do not stare into the LED ʼ s.

2. Handling Instructions

【 M-5 】

• Do not attempt to disassemble, modify or update this device.

• Do not use the scanner while operating machinery.

• Do not drop or put heavy items on this product or its cable.

• Do not pinch or forcibly bend the cable, especially at very low temperature.

• Do not insert foreign substances into the device.

• Do not use/leave this device:

- In areas exposed to direct sunlight for long periods of time

- In dusty environments

- In risk for an exposure to chemicals

- Near water or other liquids, as well as in extremely high humidity

- Near heat sources such as radiators, heat registers, stoves, or other types of devices that produce heat

- Near microwaves, medical devices, or RF-emitting devices

- In the reach of blinking lights such as CRT

• Do not use this product during a lightning storm.

【 AC/DC Adapter 】

• Use only the supplied AC adapter with the enclosed region specific plugs for connection to the wall socket.

• This product may produce heat when in use, but it does not affect its performance.

• Do not pull on the cord when unplugging the power cord from a power outlet. Grasp the plug to remove it.

• Do not plug in or out this product with wet hands.

• Unplug this product when it is not in use or when it is being cleaned.

Before Getting Started

■ What's in the Box

No.

1 Scanner

Item

2 Interface cable

3 Wedge branch cable

Function

An omnidirectional imaging scanner

A cable for connecting the scanner

Y-cable: The cable that can be used to connect a keyboard and the scanner's straight cable to a host computer.

Connector cover

Quick start guide

A cover used to fix the connection between the

Y-cable and the straight cable.

5 Instruction of connector cover An instruction manual for the connector cover

6 AC adapter AC adapter with interchangeable plugs

7 Interchangeable plugs Plugs for different regions

This manual provides the basic product specification and setup instructions.

Notes

Different for each interface spec.

Only for Wedge interface.

Only for M-5-WEDGE+PS package.

Only for RS-232C and Wedge interface.

Overview

■ M-5 Basic Specifications

Parameter

Physical

Features

Size

Weight

Operation

Section

Interfaces RS-232C

USB

Specifications

(H)140.0 × (W)92.0 × (D)95.5 mm

Approx.295g (excluding the cable)

Scan Conﬁrmation Buzzer and 3 colors LED(Green/Blue/Orange)

Keys 2 keys (Trigger Switch/Mode Switch)

9600bps 〜 115.2kbps

Full-Speed 12Mbps(HID/VCP)

Hi-Power Bus-powered

Control

Section

Scanning

Section

Power

Supply

Section

Wedge PS/2 Keyboard (Connect or disconnect the keyboard.)

ASIC

SDRAM

OEY-0603 CPU:ARM-1026EJ-S Core:160MHz

128Mbits(1M × 4Banks × 32Bits)

Flash ROM 16Mbits(1M × 16Bits) Flash Memory

Light Source

Wavelength

8-AllnGaP Red LEDs(Omniscan Mode)/625nm

4-AllnGaP red LEDs (Mobile Mode)/633nm

Scanning Method WVGA(752 x 480 pixels) CMOS area sensor

Supported

Symbologies

(1D)

UPC-A,UPC-E, UPC-E1, UPC-A Add-on, UPC-E Add-on, EAN-13,

EAN-8, EAN-13 Add-on/EAN-8 Add-on, JAN-8 , JAN-13, Code

39,Tri-Optic, NW-7, Industrial 2 of 5, Interleaved 2 of 5, Code 93,

Code 128, GS1-128, S-Code, MSI/Plessey, UK/Plessey, TELEPEN,

Matrix 2 of 5, Chinese Post Matrix 2 of 5, IATA,Code 11,

Korean Postal Authority code , GS1 DataBar, Postal Code

Supported

Symbologies

(2D)

PDF417,MicroPDF417,QR Code,MicroQR Code,Data

Matrix (ECC 000-140/ECC 200),MaxiCode (Modes 2 to 5),

Aztec Code, EAN.UCC Composite bar code, Codablock F

Operating voltage 4.5 to 6.6V

USB RS-232C, Wedge

Current consumption

Peak

(when scanning and decoding)

Average

(when scanning and decoding)

Stand-by

420mA 400mA

280mA (typ) 210mA (typ)

140mA (typ) 130mA (typ)

Durability Operating Temp.

0 to 40 deg. C

Storage Temp.

− 40 to 70 deg. C

Operating Humidity 5 to 95 ％ (non-condensing)

Storage Humidity 5 to 95 ％ (non-condensing)

Ambient

Light

Immunity

Fluorescent ： 10,000lx or less

Incandescent lamp ： 10,000lx or less

Sunlight ： 50,000lx or less ( * 1)

Dust-and-Drip Proof IP52

Static Electricity 15kV (no destruction)

Shock

Endurance

Dropped once from each of 5 angles onto concrete ﬂoor from a height of 150cm with no defects found. (Total 5 times)

(*1)Except “ Mobile phone scanning mode ” in each condition. Please note that scanning while the

LCD screen is exposed to direct sunlight may have a negative eﬀect on the reading performance.

■ Detailed View

No.

①

②

③

④

⑤

⑥

⑦

⑥

①

⑤ ④

③

②

Part

Optical Window

Function

Trigger Switch

Mode Switch

Indicator LED

Indicator LED While Mobile phone scanning Mode

Buzzer Holes

The trigger switch is used for the manual scanning operation. A single aiming guide will be activated in this mode.

The mode switch toggles between Mobile phone scanning mode and Normal scanning mode.

Green LED light shows the scanning operation has been successful.

Blue LED light shows when the scanner is ready to scan.

Orange LED light shows when the scanner is ready for mobile code scanning.

Screw Holes

Used to mount the scanner onto a base plate, wall etc. using D4 (diameter: 4mm) screws.

■ Various Scanning Modes

The following modes are available for different uses:

□ Normal scanning mode

□ Mobile phone scanning mode

A special mode ― in which the lighting conditions are optimized for reading barcodes, ― displayed on mobile devices such as a phone.

The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning.

□ Single line scanning

While the trigger switch is pressed, the illumination LEDs turn on and only one code can be read. The single line can read one target code out of multiple printed codes in this mode.

■ Basic Specifications for Universal AC adapter

Physical

Features

Parameter

Size

Cable Length

Specifications

(H)75 x (W)47.5 x (D)28mm (excluding boss)

1.8m

Input

Colour Black

Power Voltage AC 90V to 265V

Output

Supply Current 500mA Max

Power Voltage 5.7V to 6.3V

Maximum Current 2A Max

Environmental

Speciﬁcation

Operating Temp.

0 to 40 deg. C

Operating Humidity 25 to 85% (non-condensing)

Storage Temp.

− 20 to 60 deg. C

Storage Humidity 20 to 90% (non-condensing)

Power

Normal scanning mode

Mode Switch

Finished Scanning or Time-Out

Mobile phone scanning mode

Figure 1. Scanning mode diagram

Trigger

Switch

Trigger

Switch

Single line scanning

Finished Scanning or Time-Out

The M-5 can be configured by reading the menu codes below. Read more about configuration options

(by Opticonfigure) on www.opticon.com.

: Default

Default Setting

■ Enable QR Code

(* Use this only when “ Disable QR Code ” is set in advance.)

Start / END: ZZ

Read Time Setting

You can set the time that the scanner will try to read a code after it is detected by the auto trigger. This can be set for “ Normal scanning mode ” and “ Mobile phone scanning mode ” .

For single line scanning, it can be set as the LED aiming time.

■ Normal scanning mode

Serial command : Y0 (0.5s) Serial command : Y2 (2.0s)

Enable QR Code: BCD

Multiple read reset time Setting

The time that a code will not be read after it is read successful once can be set. This can prevent the double read of a code.

■ Multiple read reset time

AJ (200ms) Serial command : E9H (700ms)

Auto Trigger Setting

Auto trigger ON / OFF can be set. When it is set to OFF, only the trigger switch can be used to activate the scanner.

■ Auto Trigger ON

Serial command : +I

Serial command : AK (300ms) Serial command : E9I (800ms)

■ Auto Trigger OFF

Serial command : +F

Stop / END: ZZ

Serial command : Y1 (1.0s) Serial command : Y3 (3.0s)

Serial command : AL (400ms) Serial command : E9J (900ms)

■ Back to default

Serial command : U2, C01, SU, UB

■ Mobile phone scanning mode

Serial command : E91 (1s) Serial command : E93 (3s)

Serial command : AM (500ms) Serial command : E8T (1s)

Scanning Mode Setting

"Normal scanning mode" or "Mobile phone scanning mode" can be selected as primary mode when the scanner starts up.

■ Normal scanning mode

Serial command : E8Y

Serial command : E92 (2s) Serial command : E94 (4s)

■ Single line scanning

Serial command : E8V (1s) Serial command : E8X (5s)

■ Mobile phone scanning mode

Serial command : E8Z

Serial command : E8W (3s)

Serial command : AN (600ms) Serial command : AG (Infinity)

Contact

Please contact OPTICON or your local dealer.

The Netherlands

U.S.A.

France

Germany

Italy

Spain

Opticon Sensors Europe B.V.

tel: +31 (0)23-5692700

Opticon Inc.

tel: 800-636-0090 /

/ email: [email protected]

email: [email protected]

Opticon S.A.S.

tel: +33 (0)1-41461260 / email: [email protected]

Opticon Sensoren GmbH tel: +49 (0)6074-91890-0 / email: [email protected]

Opticon s.r.l.

tel: +39 (0)051-6321800 / email: [email protected]

Opticon Sensores S.L.

tel: +34 (0)902-747469 / email: [email protected]

Sweden

United Kingdom

Taiwan

China

Australia

Brazil

Opticon Sensors Nordic AB tel: +46 (0)8-58548560 /

Opticon Limited tel: +44 (0)1582-635100 email: [email protected]

/ email: [email protected]

Opticon Far Eastern Ltd.

tel: +886 2-27597444 / email: [email protected]

Opticon Sensors Europe B.V., Shanghai Representative Office tel: +86 21-64480881 / email: [email protected]

Opticon Sensors Pty. Ltd.

tel: +61 (0)2-43402666 / email: [email protected]

Opticon Sensors Europe B.V., Latin American Office tel: +55 11-5081 2088 / email: [email protected]

More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.

M-500009062-0-00

Hello! I am an AI chatbot specifically trained to assist you with the Opticon M-5 Quick start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!