Opticon NLV-3101 Specification Manual

Opticon NLV-3101 is a fixed-position 2D imager scanner capable of reading most common 1D and 2D barcodes. It provides excellent performance in a wide range of applications, including retail, healthcare, and manufacturing. With its compact size and flexible mounting options, the NLV-3101 can be easily integrated into any workspace.

Some of the key features of the NLV-3101 include:

High-resolution imaging engine for fast and accurate barcode reading
Wide field of view for capturing barcodes from a variety of angles
Multiple interface options for easy connectivity to host systems
Durable construction for use in demanding environments

PDF

Document

Fixed Position 2D Imager Scanner

NLV-3101

SR

：

Standard Range type

This manual provides specifications for the NLV-

3101 fixed position 2D imager scanner.

Specifications Manual

NLV-3101

Specifications Manual

All information subject to change without notice.

Document History

Model Number:

Edition:

Date:

NLV-3101

2nd

2019-06-18

Copyright 2010 Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd.,

12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-

446-1184

SUPPORT

USA

Phone: 800-636-0090

Email: [email protected]

Web: www.opticonusa.com

Europe

Email: [email protected]

Web: www.opticon.com

Specification Number: SS12019

Original Spec Number: SS12018

NLV-3101

Specifications Manual

Revision History

Specification No.

Product name

Edition Date

: SS12019

: NLV-3101

Page

First 2012/10/10 -

Section

Second 2019/06/18

5.1

6.1

6.1.2.1

6.1.2.3

7.1

8.1

8.4

Description of Changes

Initial release

Delete wedge from Various interfaces explanation

Delete Interface, Wedge row

Correct Supported 1D Symbologies, Curvature:

Radius ≧ 16 mm (12-digit UPC)

 Radius ≧ 16 mm (10-digit Codabar)

Radius ≧ 20 mm (10-digit Codabar)

 Radius ≧ 20 mm (12-digit UPC)

Supported 2D Symbologies :

Delete Data Matrix(ECC 000-140)

Revise Imager, Baud rate:

RS-232C (baud rate: 15.2 kbps)

 RS-232C (baud rate: 115200 bps)

Power, Range of operating voltage:

Delete wedge

4.5 ~ 5.5 V



4.5 ~ 6.6 V

Power, Range of operating voltage, Note:

Delete AC adapter information

Environmental Specifications, Temperature, Note:

Delete AC adapter information

Update standard

Delete External Power Supply column

Change section head:

AC Adapter Specifications



RS-232C

Update the text to RS-232C information

Delete 5.2. Wedge PS/2 Power Supply (Host)

Delete wedge from the text

Add note:

* When using data other than ASCII (0x00 - 0x7F), data length must be 8 bit.

Update value VCC Note:

4.5 ~ 5.5 V (Typ. 5 V)



4.5 ~ 6.6 V

Add notes to S-GND, RTS, CT, TxD and RxD

Add Wire conductors diameter and Insulator outer diameter

Delete 6.3. Wedge PS/2

Correct errors:

*3, *4 Reference value based on the datasheet

(25°C, IF = 50 mA )  (25°C, IF = 140 mA )

Correct Condition, Scanning Test:

Accept the performance with 90% or more success rate for 10 tries of scan. One scan should be tested within 1 second.



Accept the performance with 90% or more success rate for 10 tries of scan. One scan should be tested within 2 second.

Correct Code39 0.508mm 4 digit Size:

36 × 25  43 × 25

Correct errors:

Distance: 100mm  95mm

Edition Date

Second 2019/06/18

NLV-3101

Specifications Manual

Page

17.2.3

17.3

17.5

17.6

Section

9.11

10.1

10.2

13.5

15.1

15.2

17.2.1

17.2.2

Description of Changes

Correct errors:

No malfunction found ( ± 10 kV, air or direct discharge)

 No malfunction found ( ± 8 kV, air or direct discharge)

Update standard

Update RoHS

Add Disposal section

Delete 15.1.1. Included AC Adapter and

15.1.2. Non Included AC Adapter

Update to Individual Packaging information

Update Collective Packaging information

Correct Codabar (NW7) Minimum length: 1  2

Add default ○ :

-Composite GS1 DataBar

-Composite GS1-128

Delete Data Matrix(ECC 000-140)

Delete wedge from [Data buffering]

Delete

“Supported OS”

Update section head:

USB-HID, Wedge Defaults



USB-HID Defaults

Delete 18. Accessories

Update header:

NLV-3101 （ SR ） 

NLV-3101

Correct errors, adjust format.

NLV-3101

Specifications Manual

NLV-3101

Specifications Manual

10. Regulatory Compliance

.......................................................................................................... 25

10.1. LED Safety

...................................................................................................................... 25

10.2. EMC

................................................................................................................................ 25

11. RoHS

....................................................................................................................................... 25

12. Reliability

................................................................................................................................ 26

13. Precautions

............................................................................................................................. 26

13.1. Shock

.............................................................................................................................. 26

13.2. Temperature Conditions

.................................................................................................. 26

13.3. Foreign Materials

............................................................................................................. 26

13.4. Other

............................................................................................................................... 26

13.5. Disposal

.......................................................................................................................... 26

14. Product Label

.......................................................................................................................... 27

15. Packaging Specifications

...................................................................................................... 28

15.1. Individual Packaging

....................................................................................................... 28

15.2. Collective Packaging

....................................................................................................... 29

16. Physical Features

................................................................................................................... 30

16.1. Dimensions

..................................................................................................................... 30

16.2. Weight

............................................................................................................................. 30

16.3. Mechanical Drawing

........................................................................................................ 30

17. Default Setting

........................................................................................................................ 31

17.1. Default Setting Menu Code

............................................................................................. 31

17.2. Supported Symbologies

.................................................................................................. 31

17.2.1.

1D Bar Codes .......................................................................................................................... 31

17.2.2.

GS1 DataBar, Composite Code .............................................................................................. 32

17.2.3.

2D Codes ................................................................................................................................. 32

17.3. Other Default

................................................................................................................... 33

17.4. RS-232C Default

............................................................................................................. 33

17.5. USB-COM

....................................................................................................................... 34

17.6. USB-HID Defaults

........................................................................................................... 34

NLV-3101

Specifications Manual

1. Abstract

This manual provides specifications for the NLV-3101 fixed position 2D imager scanner.

It is a product that has the SR (Standard Range) performance.

2. Overview

The NLV-3101 is a fixed position 2D imager scanner that enables high speed scanning of standard linear (1D) and 2D symbologies.

Main features of the NLV-3101 are as follows:

・ High-speed scanning

Extremely high speed performance ensures stress free scanning and fast response without being affected by hand movement and light conditions.

・ Editing function

A new functi on “Data Editing Program” captures up to 16 codes on multiple images simultaneously in one go. Output editing process, such as GS1 format, also can be set easily.

・ World's most compact 2D scanner in its class

The NLV-3101 offers ultra-compact size and easy operation.

・ LED aiming

A sharp single line of green LED makes it easy to aim the scanner while providing safety and longlife.

・ Various interfaces

Three types of interfaces, RS-232C, USB-HID, and USB-COM, are supported.

・ RoHS compliance

The NLV-3101 is a RoHS compliant product, which is declared by Optoelectronics Co., Ltd.

* Refer to “NLV-3101 user’s manual” for supported codes and function commands.

Code 128

UPC

NLV-3101

Specifications Manual

3. Basic Specifications

Item

CPU

SDRAM

Flash ROM

RS-232C

USB

Scanning method

Scanning light source

Aiming light source

Effective pixels

View angle

Symbologies

Minimum resolution

Curvature

Wide Bar Code

Motion tolerance

Depth of field

(mm)

Symbologies

Code 39

Minimum resolution

32-bit RISC

Specification

256 Mbits (2 M × 4 Banks × 32 Bits )

Note

16 Mbits (1 M × 16 Bits) Flash Memory

300bps ~ 115200 bps

・ Full-Speed 12 Mbps (HID/COM)

Default :9600bps

WVGA (0.36 million-pixel) CMOS area sensor Frame rate: 60 fps

2 red LEDs

1 green LED

0.36 million pixels (H: 752 x V: 480)

Horizontal: about 40.6°

Vertical: about 26.4°

UPC-A, UPC-A Add-on, UPC-E, UPC-E Addon, EAN-13, EAN-13 Add-on, EAN-8, EAN-8

Add-on, JAN-13, JAN-8, Code 39, Tri-Optic,

Codabar (NW-7), Industrial 2 of 5, Interleaved

2 of 5, S-Code, IATA, Code 93, Code 128,

MSI/Plessey, UK/Plessey, TELEPEN, Matrix 2 of 5, Chinese Post Matrix 2 of 5, Code 11,

Korean Postal Authority code, Postal Code

Code 39 : 0.127 mm

Radius ≧ 16 mm (10-digit Codabar)

Radius ≧ 20 mm (12-digit UPC)

Possible to read: Code 39 with 100 mm width and resolution 0.2mm (DOF: 155 mm)

Possible to read: UPC moving at 2 m/s (DOF:

125 mm)

Resolution (0.127) 90 ~ 125

PCS 0.9

Resolution (0.254)

Resolution (0.508)

70 ~ 190

*65~ 235

Resolution (0.2) 80 ~ 160

Resolution (0.33) 55~ 185

GS1 DataBar, GS1 DataBar Limited, GS1

DataBar Expanded, Composite GS1 DataBar,

Composite GS1-128, Composite EAN,

Composite UPC

GS1 DataBar

Composite Code

: 0.169 mm

PCS 0.9

* The depth of field depends on the view angle and symbol length

GS1 DataBar: formerly called

“RSS”

NLV-3101

Specifications Manual

Item

Symbologies

Minimum resolution (mm)

Depth of field

(mm)

Scan angle

PDF417

QR Code

Data Matrix

Minimum PCS

Image data format

Shades of gray

Range of output image

Resolution of output image

Interface of output image

Baud rate

Range of operating voltage

Current consumption

(RS-232C)

Reading

Standby

Operating

Temperature

Storage

Humidity

Ambient light immunity

Operating

Storage

Fluorescent

Sunlight

Vibration

Drop

Dust and drip proof

Specification

PDF417, MicroPDF417, Codablock F,

QR Code , Micro QR Code,

Data Matrix (ECC 200),

MaxiCode (Modes 2 to 5), Aztec Code,

Chinese Sensible Code

PDF417

QR Code

Data Matrix

: 0.169 mm

: 0.212 mm

Resolution (0.169) 85 ~ 130

Resolution (0.254)

Resolution (0.212)

Resolution (0.381)

65 ~ 180

95 ~ 115

60 ~ 185

Resolution (0.254) 80 ~ 145

Pitch : ±50°

Skew : ±50°

Tilt : ±180°

Disable Code 128 when Codablock F is enabled.

PCS 0.9

Note

MRD: 32% or more 0.3 or more

Windows Bitmap, JPEG

1024, 256, 16, 2

Select top/bottom (row) and left/right (column)

Black spot may appear on images, however, it does not affect the scanning performance.

Full,1/2, 1/4

RS-232C, USB-COM

USB-COM

(full speed)

RS-232C

(baud rate: 115200 bps)

4.5 ~ 6.6 V

265 mA (max)

70 mA (max)

-20 ~ 50°C

-20 ~ 60°C

About 3 sec

About 40 sec

20 ~ 85% (no condensing, no frost)

20 ~ 90% (no condensing, no frost)

10,000 lux or less

100,000 lux or less

10 Hz ~ 100 Hz, acceleration of 19.6 m/s2,

60 minutes per cycle, repeat once in each X, Y and Z-direction

Drop 3 times, at each 5 faces (right, left, front, back and top), from a height of 75 cm onto a concrete surface.

IP65

Resolution: Full

Except the communication speed of 115200 bps.

UPC

Optical axis angle: 75°

Distance: 125 mm

* Excluding the part where the interface cable is attached

NLV-3101

Specifications Manual

Item

This scanner is an Exempt Risk Group LED product.

LED safety

EMC

IEC 62471:2006 Exempt Risk Group

VCCI クラス

Class B 、

B / FCC Class B / EN 55032

EN 55024

Product safety

ESD immunity

No destruction

No malfunction

CE Marking

15 kV (Apply static electricity 50 times to the surface of the scanner)

Contact discharge (direct / indirect): ±6 kV

Air discharge (direct):±8 kV

80 ~ 1000 MHz

Radiofrequency electromagnetic field. Amplitude modulation

Frequency

Level

Voltage

3 V/m

80% (AM)

Alternating-current input cable: ±1 kV

Peak Wavelength:

624 nm

For residential, commercial and lightindustrial environments

Condition:

IEC:61000-4-2 compliant

Condition:

IEC61000-4-3 compliant

Fast transient Pulse 5 / 50 ns (Tr / Tw)

Condition:

IEC61000-4-4 compliant

Frequency 5 kHz

Surge

Pulse

Voltage

Specification

1.2 / 50 ns (Tr / Th)

From L to P : ±2 kV (closed-loop voltage)

Note

Condition:

IEC61000-4-5 compliant

Radiofrequency common mode

Power frequency magnetic field

Voltage dip, momentary voltage drop, fluctuation

Frequency

Level

Frequency

Level

Dip 1

Dip 2

Momentary drop

From L to L : ±1 kV (closed-loop voltage)

0.15 ~ 80 MHz

3 V

80% (AM)

50 and 60 Hz

3 A/m

Drop 30%, 0.5 cycles

Drop 60%, 5 cycles

Drop > 95%, 250 cycles

Condition:

IEC61000-4-6 compliant

Condition:

IEC61000-4-8 compliant

Condition:

IEC61000-4-11 compliant

Dimensions

Weight

41.1 × 33.0 × 24.0 (DWH mm)

Approx. 30 g

Excluding the interface cable

NLV-3101

Specifications Manual

4. Detailed View

Figure 1: Detailed View of NLV-3101

No Name

1 Trigger Key

Description

By pressing this key, the scanner starts taking an image from the scanning window and LED illumination is emitted to read 1D/2D codes.

2 Scanning Window

Light paths of the imager, LED illumination and LED aiming. Ensure that the lens is not exposed to dust and dirt before scanning.

Status LED

Buzzer Hole

5 Mounting Holes

The operating statuses are indicated by different colors.

A sound from a built-in buzzer comes out through these holes. When they are covered, the buzzer sound may not be able to be heard. The sound varies depending on the status. Buzzer settings can be configured in various ways: enable or disable buzzer as well as change the loudness and duration.

Screw holes for installing the scanner. Two more holes are located on the back side, the opposite side of where the trigger key is located.

NLV-3101

Specifications Manual

5. Electrical Specifications

5.1. RS-232C

Range of working voltage

Power ripple

Current consumption*

: 4.5 to 6.6 V

: 100 mVp-p max (10 to 100 kHz, power supply voltage 5.0 V)

: 265 mA (max) during reading

70 mA (max.) in stand-by mode

5.2. USB Power Supply

Power (typical) : 5.0 V @500 mA High-Power port

Current consumption : 400 mA (max) during reading

: 85 mA (max) in stand-by mode operation

* The current consumption was measured at 25°C.

NLV-3101

Specifications Manual

6. Interface Specifications

The NLV-3101 supports three types of interfaces; RS-232C, USB-HID, and USB-COM.

6.1. RS-232C

The RS-232C interface has two specifications for connecting to the host: D-Sub9pin with DC jack and loose end (10 wires) with sequencer signals.

Communication Setting

Baud rate : 300 ~ 115200 bps

Data length

Parity bits

: 7 / 8 bits

: None / Even / Odd parity

Stop bits : 1 / 2 bit

* Multi byte character data or images can be transmitted via RS-232C interface.

* When using data other than ASCII (0x00 - 0x7F), data length must be 8 bit.

Signal Level : signal names are based on the signals transmitted from the scanner to the host.

Voltage(V)

Signal Name IN/OUT

Mark Space

TxD

RxD

OUT

-5 ~ -15

-3 ~ -15

+5 ~ +15

+3 ~ +15

RTS

CTS

OUT

-5 ~ -15

-3 ~ -15

+5 ~ +15

+3 ~ +15

Signal Level: sequencer signals (loose end spec only)

Signal Name

External trigger

IN/OUT

OUT

L level

-0.3 ~ 0.6 V

0.3 V / 10 mA

Voltage(V)

Space / ON

3 V ~ Vcc +0.3 V

OC output / Vcc +0.3 V

6.1.1. D-Sub9pin

6.1.1.1.

Pin Assignment

Signal Name Pin No.

Shield 1

TxD

RxD

(NC)

GND

(NC)

CTS

RTS

(NC)

Note

Connect to pin 6

Connect to pin 4

Open (not connected)

Figure 2: RS-232C D-Sub9pin Connector

6.1.1.2.

RS-232C D-Sub 9pin Circuit

NLV-3101

Specifications Manual

Connector

Power supply

Figure 3: RS-232C D-Sub 9pin Circuit

: D-Sub 9pin, female

: EIAJ RC5320A (voltage classification 2) jack

6.1.1.3.

RS-232C D-Sub 9pin Interface Cable

Weight: approx. 90 g

Figure 4: Cable (RS-232C D-Sub 9pin)

[Unit: mm]

NLV-3101

Specifications Manual

6.1.2. Loose End

6.1.2.1.

Pin Assignment

Signal Name Cable Color

VCC Red

Trigger Brown

S-GND

RTS

CTS

Yellow

Orange

Black

Gray

Blue

Power-supply voltage

Note

4.5 ~ 6.6 V

External trigger input terminal

External OK output terminal

External NG output terminal

Signal line GND

RS-232C communication line

TxD

RxD

Green

White

RS-232C communication line

Shield GND (Black)

* Be sure the wiring is done correctly.

Heat shrinkable tube

6.1.2.2.

RS-232C Loose End Circuit

Figure 5: RS-232C Loose End Circuit

6.1.2.3.

RS-232C Loose End Interface Cable

Weight: approx. 45 g

Wire conductors diameter: AWG28

Insulator outer diameter: 0.65mm

NLV-3101

Specifications Manual

Figure 6: Cable (RS-232C Loose End)

[Unit: mm]

NLV-3101

Specifications Manual

6.2. USB

The USB interface models have two specifications: HID (Human Interface Device Class) and COM

(Communication Device Class). With USB-COM model, VCP (Virtual Communication Port) allows virtual serial communication and the commands can be transmitted from the host computer.

* Multi byte character data or images can be transmitted via USB-COM interface.

6.2.1. USB Interface Specifications

Power supply : 500mA (High-Power).

Speed : Full-speed (12 Mbps)

Interface : USB-HID / USB-COM (VCP)

* The USB model is bus powered.

* Images cannot be transmitted via the USB-HID interface.

* Multi byte character data can be transmitted via USB-HID interface with settings.

* Make sure to connect to a High-power bus (500 mA max) USB terminal.

6.2.2. Connector

Pin No.

Figure 7: USB Plug (A)

Signal name

V bus

Data ( － )

Data ( ＋ )

GND

6.2.3. USB Interface Circuit

Note

Figure 8: Interface Circuit (USB)

6.2.4. USB Interface Cable

Weight: approx. 70 g

NLV-3101

Specifications Manual

Figure 9: Cable (USB)

[Unit: mm]

NLV-3101

Specifications Manual

7. Optical Specifications

7.1. Basic Optical Specifications

Item Characteristics

Scan method

Number of effective pixel

Image capture speed (*1)

Focal distance

View angle

Illumination light source

(LED × 2)

Aiming light source

CMOS area sensor (white / black)

(Column) × (Row)

752 × 480 dots

Frame rate 60 fps

Distance from the front edge of scanner 125 mm

Horizontal

Vertical

Red LED

Peak wavelength

Directivity angle: 2Φ 1/2 (*2)

Maximum radiation output (*3)

Green LED

Peak wavelength

Maximum radiation output (*4)

The fastest speed of image capture

Reference value extracted from the datasheet.

*3, *4 Reference value based on the datasheet (25°C, IF = 140 mA ).

Approx. 40.6°

Approx. 26.4°

617 nm

60°

15000 mcd

528 nm

18700 mcd

NLV-3101

Specifications Manual

7.2. Aiming Pattern

The aiming is used for the following purpose:

1. Fill light to recognize the appropriate reading range.

2. Fill light when auto trigger is used.

The aiming specifications are as follows:

- An optical axis of imaging field of view and the center of horizontal aiming width coincide at a distance of L=105±20 mm from the front edge of the scanner.

- The horizontal aiming width to the horizontal width of imaging field of view at a distance of L=105 is 80%±10%.

Figure 13: Aiming Pattern and Imaging Range

7.3. Imaging Range

The range is ±5% from the following values.

L: Distance from the front edge of scanner

[mm]

H: Horizontal imaging range [mm]

100 125 140 160 180

V: Vertical imaging range [mm] 38

104 118 133

The imaging range is no the scanning range but the imaging field of view.

75 85

NLV-3101

Specifications Manual

8. Technical Specifications

Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering the angle of view may affect the scanning performance. The conditions for technical specifications are as follows, unless otherwise specified in each section.

Ambient Temperature and Humidity Room temperature, room humidity

Ambient Light

Angles

Curvature

Power Supply Voltage

100 ~200 lux (on the surface of a bar code)

Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°

R = ∞

5.0 V

PCS (1D and 2D) 0.9 or higher

Scanning Test Accept the performance with 90% or more success rate for 10 tries of scan. One scan should be tested within 2 second.

Barcode Test Sample (1D and 2D) Specified below.

< Test chart >

For 1D codes, OPTOELECTRONICS test samples

For GS1 DataBar, stacked codes and 2D codes, printed by a dedicated printer for bar code

8.1. Barcode Test Sample

1D Bar Codes

Resolution

0.127 mm (5 mil)

0.20 mm (7.9 mil)

0.254 mm (10 mil)

0.508 mm (20 mil)

Resolution

0.20 mm (7.9 mil)

<UPC>

Resolution

0.330 mm (13 mil)

Symbology

Code 128

Symbology

12-digit UPC

Resolution

0.15 mm (6 mil)

Symbology

Codabar

GS1 DataBar/Composite

<GS1-limited>

Resolution

0.169 mm (6.7 mil)

Symbology

Limited

0.169 mm (6.7 mil) Limited-Composite

2D Codes

Resolution

0.169 mm (6.7 mil)

0.254 mm (10 mil)

Error Correction

Level-3

Resolution

0.212 mm (8.4 mil)

0.381 mm (15 mil)

Resolution

0.212 mm (8.4 mil)

0.254 mm (10 mil)

Symbology

Code 39

Error Correction

Model

ECC200

PCS

0.9

PCS

0.9

PCS

0.9/0.3

PCS

0.9

PCS

0.9

PCS

0.9

PCS

0.9

PCS

0.9

* The size is outline dimensions excluding the quiet zones.

Size (mm)

32 × 10

100 × 10

32.5 × 12

43 × 25

Size (mm)

42 × 10

Size (mm)

31.5 × 25.0

Size (mm)

20 × 10

Size (mm)

12 × 1.5

12 × 3.0

NLV-3101

Specifications Manual

No. of Digits

Size (mm)

23 × 10

35 × 15

No. of Character

Size (mm)

6 × 6

11 × 11

No. of Character

Size (mm)

5 × 5

6 × 6

No. of Character

8.2. Scan Area and Depth of Field

The scan area is measured from the front edge of the scanner.

NLV-3101

Specifications Manual

100

150

200

250

300 Code 39

Code 128

* 65

0.127(5mil)

125

0.254(10mil)

0.508(20mil)

0.20(7.9mil)

80 160

0.33(13mil)

190

185

[ Unit

：

mm ]

235

PDF417

QR Code

0.169(6.7mil)

130

0.254(10mil)

0.212(8.4mil)

95 115

0.381(15mil)

180

185

0.254(10mil)

Data Matrix

80 145

* The depth of field depends on the view angle and symbol length.

* Please consider the mounting position by placing a label near the middle of depth of field and eliminate ambient light and specular light from LED illumination.

Figure 14: Scan Area and Depth of Field

NLV-3101

Specifications Manual

8.3. Printed Contrast Signal (PCS)

0.3 or higher

MRD : 32% and higher

(70% or higher reflectivity of space and quiet zone)

Distance : 125 mm from the front edge of the scanner

Bar Code Sample : UPC specified in Chapter 8.1. (Resolution: 0.33 mm, PCS: 0.3)

MRD = Minimum reflectance of white bar - Maximum reflectance of black bar

PCS =

Reflectance of white bar － Reflectance of black bar

Reflectance of white bar

8.4. Minimum Resolution

1D Code : 0.127 mm (5 mil) Code 39 specified in Chapter 8.1

GS1-DataBar : 0.169 mm (6.7 mil) GS1 DataBar Limited specified in Chapter 8.1

Stacked Code : 0.169 mm (6.7 mil) PDF417, GS1 DataBar Limited Composite specified in Chapter 8.1

2D Code : 0.212 mm (8.4 mil) QR Code and Data Matrix specified in Chapter 8.1

Bar Code Sample

Distance

Angle

Curvature

: The above codes specified in Chapter 8.1

: 95 mm from the front edge of the scanner

: α = 0°, β = ＋ 15°, γ = 0°

: R = ∞

8.5. Wide Bar Code

Code 39 with width of 100 mm and resolution of 0.2 mm can be read

Bar Code Sample

Distance

Angle

Curvature

: 0.20 mm Code 39 / PCS 0.9 specified in Chapter 8.1

: 155 mm from the front edge of the scanner

: α = 0°, β = ＋ 15°, γ = 0°

: R = ∞

Figure 15: Wide Bar Code

NLV-3101

Specifications Manual

8.6. Pitch, Skew and Tilt

Pitch

Skew

Tilt

: α = ±50°

: β = ±50°

: γ = ±180°

Bar Code Sample : 0.33 mm UPC specified in Chapter 8.1

Distance

Curvature

: 125 mm from the front edge of the scanner

: R = ∞

* For the pitch angle and tilt angle measurement, set the skew angle β = +15°

Figure 16: Pitch, Skew and Tilt

8.7. Curvature

0.33 mm 12-digit UPC : R ≧ 20 mm

0.15 mm 10-digit Codabar : R ≧ 16 mm

Bar Code Sample

Distance

Angle

: 0.33 mm UPC, 0.15 mm Codabar specified in Chapter 8.1

: 105 mm from the front edge of the scanner

: α = 0°, β = ＋ 15°, γ = 0°

Barcode

Figure 17: Curvature

Note: Scanning may fail due to the specular reflection of LED illumination when the reflectivity is high.

NLV-3101

Specifications Manual

8.8. Auto Trigger

The scanner starts scanning automatically when it detects a change in brightness that occurs when a bar code label is presented in front of it.

Trigger should be enabled when inserting a gray-colored paper on a black backing paper.

Trigger also should be enabled when inserting a black-colored paper on a gray backing paper.

Paper used : Black paper from Glory called as Black 010010016

Ambient Light

: Gray paper from Glory called as Silver-gray 010010016

: 500 ~ 1000 lux

Moving Speed of Detected Paper : 2 m/second or slower

Ambient Temperature and Humidity : Room temperature and room humidity

Figure 18: Auto Trigger

8.9. Motion Tolerance

UPC can be read when it is moving at 2m/s.

Ambient Temperature and Humidity : Room temperature and Room humidity

Ambient Light

Distance

PCS (1D and 2D)

Bar Code Sample

: 500 ~ 1000 lux

: 125 mm from the front edge of the scanner

: 0.9 or higher

: Refer to Chapter 8.1.

Figure 19: Motion Tolerance

* Scanning may fail due to the specular reflection of LED illumination when the reflectivity is high.

NLV-3101

Specifications Manual

9. Environmental Specifications

9.1. Temperature

Scanning performance is guaranteed when the range of ambient temperature around the scanner is the following values:

Operating Temperature

Storage Temperature

: -20 ~ 50 °C

: -20 ~ 60 °C

Bar Code Sample

Distance

Angle

Curvature

Scanning Test

: 0.33 mm UPC specified in Chapter 8.1

: 125 mm from the front edge of the scanner

: α = 0°, β = ＋ 15°, γ = 0°

: R = ∞

: Read at intervals of 300 ms

* When you attach this scanner to a place with few crevices, or the bad place of breathability, please check the circumference temperature of this scanner.

9.2. Humidity

Scanning performance is guaranteed when the range of ambient humidity around the scanner is the following values:

Operating Humidity

Storage Humidity

: 20 ~ 85% RH (no condensation, no frost)

: 20 ~ 90% RH (no condensation, no frost)

Bar Code Sample

Distance

Angle

Curvature

: 0.33 mm UPC specified in Chapter 8.1

: 125 mm from the front edge of the scanner

: α = 0°, β = ＋ 15°, γ = 0°

: R = ∞

NLV-3101

Specifications Manual

9.3. Ambient Light Immunity

Scanning performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values:

Incandescent light : 10,000 lux

Fluorescent light : 10,000 lux

Sunlight : 100,000 lux

Bar Code Sample

Distance

Angle

Curvature

Power Supply Voltage

: 0.33 mm UPC specified in Chapter 8.1

: 125 mm from the front edge of the camera module

: α = 0°, β = ＋ 15°, γ = 0°

: R = ∞

: 5.0 V

Figure 20: Ambient Light Immunity

* Be sure that the direct light or specular reflection from the light source does not enter the light receiving section of the NLV-3101.

9.4. Dust and Drip Proof

IEC IP65 equivalent

NLV-3101

Specifications Manual

9.5. Cable Strength

There shall be no sign of malfunction after the following cable strength test.

Cable Strength Test: Affix the scanner to an immovable object and pull it using a force of 24.5 N

(2.5 kgf static loading) for 1 second. Repeat this 20 times continuously.

9.6. Cable Bending Strength

There shall be no sign of malfunction after the following cable bending test.

Cable Bending Test: Add a load of 4.9 N (500 gf) to a cable and bend it at an angle of 60° to both right and left. Repeat this 1000 times continuously.

Figure 21: Cable Bending

9.7. Vibration Strength (without packing)

There shall be no sign of malfunction after the following vibration test.

Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s

(2.0 G) for 30 minutes (60 minutes per cycle) in the non-operating state.

Repeat this in each X, Y and Z direction.

9.8. Vibration Strength (in individual packing)

There shall be no sign of malfunction after the following vibration test.

Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s

(2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state.

Repeat this in each X, Y and Z direction.

NLV-3101

Specifications Manual

9.9. Drop Impact Strength (without packaging)

There shall be no sign of malfunction after the following drop test.

Drop test: Drop the scanner three times (15 times in total), at each 5 face, from a height of 75 cm onto a concrete floor as shown below.

Figure 22: Drop Test

9.10. Drop Impact Strength (in individual packaging)

There shall be no sign of malfunction after the following drop test.

Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 100 cm onto a concrete floor.

9.11. Electrical Specifications

Withstand Voltage

Insulation Resistance

Current Leakage

: AC 1500 V / 60 seconds, 10 mA or less

: DC 500 V, 2 MΩ or higher

: 250 μA or less / AC 250 V 60 Hz

Power Line Noise Immunity : ±1 kV or lower

Electrostatic Discharge Immunity : No destruction found (±15 kV, air or direct discharge)

: No malfunction found (±8 kV, air or direct discharge)

: ±6 kV (contact, direct or indirect discharge)

*Testing method is compliant with IEC-61000-4-2. (150 pF, 330 Ω)

NLV-3101

Specifications Manual

10. Regulatory Compliance

10.1. LED Safety

IEC 62471:2006 Exempt Risk Group

10.2. EMC

EN55024:2010

EN55032:2012 +AC:2013 Class B

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation.

VCCI Class B

この装置は、クラスＢ情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、こ

の装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取

扱説明書に従って正しい取り扱いをして下さい。

ＶＣＣＩ－Ｂ

11. RoHS

The NLV-3101 is compliant with RoHS directive.

RoHS: The restriction of use of certain hazardous substance in electrical and electronic equipment.

Directive 2011/65/EU

Commission Delegated Directive (EU) 2015/863

NLV-3101

Specifications Manual

12. Reliability

MTBF (Mean Time Between Failures) 50,000 hours

Note: The reliability of the NLV-3101 is guaranteed as far as it is operated under normal operating conditions in the range of advised operating temperature and without excessive electrical or mechanical shock.

13. Precautions

Handle this product carefully. Do not deliberately subject it to any of the following.

13.1. Shock



Do not throw or drop the imager.



Do not place heavy objects on the cables.

13.2. Temperature Conditions



Do not use the imager at temperatures outside the specified range.



Do not pour boiling water on the imager.



Do not throw the imager into the fire.



Do not forcibly bend the cables at low temperatures.

13.3. Foreign Materials



Do not subject the imager to chemicals.

13.4. Other



Do not plug/unplug the connectors before disconnecting the power.



Do not disassemble this product.



Do not place the product near a radio or a TV receiver, as the imager may cause reception problems.



The imager may be damaged by voltage drops.

13.5. Disposal



This product may contain hazardous or toxic chemicals that are not suited for household waste disposal. Please dispose of responsibly at a waste site for electrical and electronic equipment.

14. Product Label

The product label is affixed to the scanner as shown below.

NLV-3101

Specifications Manual

Figure 23: Product Label Position

Serial number

Figure 24: Enlarged View of Label

15. Packaging Specifications

15.1. Individual Packaging

PROTECTION BAG E

B85009-09

NLV-3101

Specifications Manual

B85006-15B

Put a cable onto the PROTECTION BAG E.

D i s p l a y f o r t h e s e r i a l - N o .

『

000000

』

0 0 0 0 0 0 ＝ S a m e n u m b e r a s t h e s c a n n e r .

N u m b e r o f s i x d i g i t s .

* C o n t i n u o u s N u m b e r

BAR CODE LABEL for BOX

Do not fold at the Bar-Code Position, when stick the Label on to the Corner of Box.

Figure 25: Individual Packaging

NLV-3101

Specifications Manual

15.2. Collective Packaging

Assembled package size : 520 x 600 x 430 (DWH mm)

B O X f o r M S H - 1 1 0

（ B 8 5 0 0 6 - 1 5 A ）

Carton Box ：NO1(5B0009)

P a c k a g e d 1 0 0 s e t s i n t o t h e C a r t o n - B o x .

⑥

⑦

⑧

①

②

⑨

⑩

③

④

⑤

10 S t e p s

① － 1

① － 2

① － 3

① － 4

① － 5

① － 6

① － 7

① － 8

① － 9

① － 1 0

R o w s

⑤

⑥

⑦

①

②

③

④

⑧

⑨

⑩

Th e o r de r o f s e ri al - No .

1 ～ 1 0

1 1 ～ 2 0

2 1 ～ 3 0

3 1 ～ 4 0

4 1 ～ 5 0

5 1 ～ 6 0

6 1 ～ 7 0

7 1 ～ 8 0

8 1 ～ 9 0

9 1 ～ 1 0 0

A ： Barcode Serial Label for Packaging Box:

Stick the labels on both front and back side of the box.

B ： Missing Serial Number Label:

Attach this label when there are more than 3 labels of which serial numbers are out of order (not in a correct sequence).

Figure 26: Collective Packaging

Note: ‘Ro mark’ on the trays and the boxes for the product indicates that the product is RoHS compliant, which is declared by Optoelectronics Co., Ltd.

16. Physical Features

16.1. Dimensions

Approx. 41.1 × 33.0 ×24.0 (DWH mm)

16.2. Weight

Approx. 30 g (excluding the cable)

16.3. Mechanical Drawing

NLV-3101

Specifications Manual

Figure 27: Mechanical Drawing

[Unit: mm]

NLV-3101

Specifications Manual

17. Default Setting

17.1. Default Setting Menu Code

The NLV-3101 is set to default settings by reading the following menu label regardless of the interface types.

Default

@MENU_OPTO@ZZ@BAP@ZZ@OTPO_UNEM@

17.2. Supported Symbologies

17.2.1. 1D Bar Codes

Code type Default

UPC

○

UPC Add-on 2

UPC Add-on 5

EAN(JAN)

○

EAN Add-on 2

EAN Add-on 5

EAN-13

EAN-13 Add-on 2

EAN-13 Add-on 5

EAN-8

EAN-8 Add-on 2

EAN-8 Add-on 5

Code 39

○

Tri-Optic

Codabar (NW7)

Industrial 2of 5

Interleaved 2of 5

○

S-Code

Code 128

Code 93

IATA

MSI/Plessey

○

UK/Plessey

Telepen

Code 11

Matrix 2 of 5

Chinese Post Matrix 2 of 5

Korean Postal Authority

Intelligent Mail Barcode

POSTNET

JPN (Customer Bar Code)

Minimum length

Remarks

Not transmit ST/SP

GS1 conversion (setting required)

NLV-3101

Specifications Manual

17.2.2. GS1 DataBar, Composite Code

Default Code type

GS1 DataBar

・ GS1 DataBar Omnidirectional

・ GS1 DataBar Truncated

・ GS1 DataBar Stacked

・ GS1 DataBar Stacked Omnidirectional

GS1 DataBar Limited

GS1 DataBar Expanded

・ GS1 DataBar Expanded

・ GS1 DataBar Expanded Stacked

Composite GS1-DataBar

・ CC-A

・ CC-B

・ Limited CC-A

・ Limited CC-B

・ Expanded CC-A

・ Expanded CC-B

Composite GS1-128

・ CC-A

・ CC-B

・ CC-C

Composite EAN

・ EAN-13 CC-A

・ EAN-13 CC-B

・ EAN-8 CC-A

・ EAN-8 CC-B

Composite UPC

・ UPC-A CC-A

・ UPC-A CC-B

・ UPC-E CC-A

・ UPC-E CC-B

○

Remarks

GS1 conversion (setting required)

17.2.3. 2D Codes

Code type

PDF417

Micro PDF417

Codablock F

QR Code

Micro QR

Data Matrix (ECC 200)

Aztec Code

Aztec Runes

Chinese-sensible code

Maxi Code

Default

○

Remarks

GS1 conversion (setting required)

NLV-3101

Specifications Manual

17.3. Other Default

Item

Read mode

Extended read time

Buzzer duration

Buzzer tone

Startup buzzer

Buzzer loudness

Buzzer timing

Good read LED indicator duration

Data buffering

Default Setting

Single read

Disable

100 ms

2.7 kHz

Enable

Max (100%)

Before data transmission

200 ms

Buffered mode

[Data buffering]

Not all output data can be received depending on the host system. Therefore, it is recommended to use buffered mode for USB-HID interfaces and Unbuffered mode for RS-232C and USB-COM interfaces.

Unbuffered mode Buffered mode (default)

@MENU_OPTO@ZZ@D80@ZZ@OTPO_UNEM@

* Refer to “NLV-3101 User’s Manual” for supported commands.

@MENU_OPTO@ZZ@D81@ZZ@OTPO_UNEM@

17.4. RS-232C Default

Item

Baud rate

Parity bits

Data length

Stop bits

Handshaking

ACK/NAK

CTS time out

ACK/NAK time out

Command header

Command terminator

Response to the commands

9600 bps

None parity

8 bits

1 bit

No handshake

Default Setting

ACK/NAK no response

Indefinitely

1 second

ESC or STX

CR or ETX

Disable

17.5. USB-COM

It is necessary to install OPTOELECTRONICS USB Driver to a host.

Baud rate

Power supply

Vender ID

Product ID

Standards

Item Description

USB2.0 Full Speed

500 mA

065A

A002

CDC-ACM

NLV-3101

Specifications Manual

17.6. USB-HID Defaults

Item

Keyboard language

Output mode

Character encoding

“LF” output

Default Setting

USA

Output all values

None

Disable

Hello! I am an AI chatbot specifically trained to assist you with the Opticon NLV-3101 Specification. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

Fixed Position 2D Imager Scanner

SR

Standard Range type

This manual provides specifications for the NLV-

3101 fixed position 2D imager scanner.

Specifications Manual

Document History

Copyright 2010 Opticon. All rights reserved.

Limited Warranty and Disclaimers

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.

Serial Number

Warranty

Packaging

Trademarks

SUPPORT

Revision History

Contents

1.

Abstract

2.

Overview

3.

Basic Specifications

4.