Engine Ignition Switch. WerkMaster SPECTRE, Stealth

!

Engine Ignition

Switch

The STEALTH and SPECTRE feature a key switch ignition.

For the STEALTH:

•

START: Turn the key clockwise to START to engage the engine starter

motor. Once the engine starts release the key. ALWAYS start the

machine with the bail throttle in the SLOW IDLE position.

•

RUN: This is the position of the key when the engine is running.

•

OFF: Turn the ignition key to the OFF position to stop the engine.

ALWAYS close the propane tank valve to stop the engine, then turn

the ignition switch OFF.

WARNING

DO NOT try to start machine with the bail throttle in the operating position.

After the engine has started, pull the bail throttle to the operating position.

The clutch will engage automatically and the engine will throttle to the right speed. DO NOT pull the bail throttle with the burnishing head to the floor.

Release the bail throttle; the clutch will automatically disengage and the engine speed will return to idle.

OPERATOR’S MANUAL

14