Inspecting and Replacing the Fuel Hose. WerkMaster SPECTRE, Stealth

!

For both the STEALTH and SPECTRE:

4. Turn the two knobs a 1/4 turn counter-clockwise and remove the filter

cover.

5. Loosen the clamp that retains the filter and remove the air filter.

STEALTH

SPECTRE

Inspecting the

Fuel Hose and

Connections

6. Inspect both primary and secondary air filters. If necessary, clean

primary filter by lightly tapping and wiping seal ends with a clean cloth.

If the primary filter cannot be cleaned, is bent, or damaged, it MUST be

replaced. If secondary filter is dirty, replace it. DO NOT clean.

7. Check the intake hose for cracks or damage.

8. Install filters and replace cover.

DO NOT

‣

wash the air cleaner filters

‣

oil the air filters

‣

use pressurized air to clean the air filters.

1. Push machine to level surface.

2. Turn off the propane tank and remove it.

3. Inspect hoses for abrasions and other signs of wear. Replace all worn

or damaged hoses.

4. Check for gas leaks by spreading a soapy water solution around all the

connections while the propane tank is reconnected and the service

valve is turned ON.

SPECTRE STEALTH

OPERATOR’S MANUAL

28