CP9690 Elite AutoScanner® | User guide | 41 | en
VIN (MOD $09)
1HGCM56866A018504
EGRCOMP
EGRCOND
AIRCOMP
AIRCOND
EGR Monitor Completion Condition
Counts
EGR Monitor Conditions Encountered
Counts
AIR Monitor Completion Condition
Counts (Secondary Air)
AIR Monitor Conditions Encountered
Counts (Secondary Air)
CVN (MOD $09)
00 5C 02 52
CAL ID (MOD $ 09)
37805-RAD-A590
--------------
• If message INVALID displays on screen, the data returned from the vehicle is incorrect, or is not formatted in accordance with OBD II specifications.
4. Return to Vehicle Information menu.
• Press .
5. Return to Special Tests Menu.
• Press .
OBDCOND
IGNCNTR
CATCOMP1
CATCOND1
CATCOMP2
CATCOND2
O2SCOMP1
O2SCOND1
IPT (MOD $ 09)
Monitor Conditions Encountered
0
0
0
0
0
0
0
0
5.14 Oil Light Reset
The Oil Light Reset function allows the scan tool to reset oil life to 100% and turn off the change oil light. This function will only appear on the Special Tests menu when supported by the currently selected vehicle.
From Special Tests Menu:
1. Select Oil Light Reset.
• Use the UP and DOWN keys until Oil Light
Reset is highlighted.
• Press .
Special Tests
I/M Monitors
Drive Cycle Monitor
State OBD Check
MIL Status
O2 Monitor Tests
Diagnostic Monitor Tests
On-Board Systems
Vehicle Information
Oil Light Reset
• In the above examples, Module $09 returned data. Scroll down to view information. CVNs are shown as hexadecimal numbers.
• Abbreviations and names for in-use performance tracking data supported by the Tool are shown below. Not all data is supported by all vehicles.
Abbreviated Name Expanded Name
In-Use Perf
Tracking
In-Use Performance Tracking
OBDCOND
IGNCNTR
OBD Monitoring Conditions Encountered
Counts
Ignition Counter
2. Follow the instructions displayed. They will vary depending on the vehicle.
• Press .
Bosch Automotive Service Solutions Inc.
573464 | REV. A | 07.2015
