Current Draw. Code 3 LSS 265

Below you will find brief information for warning light beacon LSS265. The LSS265 is a weatherproof beacon with 16 LEDs in 2 stacked rows and has a unique reflector design to capture light from the LEDs and project it through the lens. The beacon is available in both magnetic and permanent mount options. It can be synced with other beacons to create synchronized flashing patterns.

PDF
Document
LSS265 Installation & Operation Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Weatherproof

  • 16 High Intensity LEDs

  • Dual Stacked Rows

  • Unique Reflector Design

  • Magnetic and Permanent Mount

  • Synchronization Capability

Frequently asked questions

The LSS265 operates on a DC voltage of 10V-30V.

The LSS265 offers several flash patterns, including single-flash, double-flash, and rotator-flash.

To synchronize two beacons, configure both to display the same Phase 1 pattern. Then connect the YELLOW wires from each light together. When the lights are activated, their patterns will be synchronized.

The LSS265 provides both magnetic and permanent mounting options. The magnetic mount is temporary, while the permanent mount provides a secure, fixed installation.

For magnetic base: Depress the rocker switch on the lighter plug. Less than 1 second for NEXT, 1 to 3 seconds for PREVIOUS, 3 to 5 seconds for DEFAULT, and greater than 5 seconds for OFF. For permanent base: Connect the blue wire to the black wire (chassis ground). Less than 1 second for NEXT, 1 to 3 seconds for PREVIOUS, 3 to 5 seconds for DEFAULT, and greater than 5 seconds for OFF.

Preparing document for printing…
0%