Languages. Axis P1425 E

Below you will find brief information for Network camera AXIS P1425 E. The AXIS P1425-E Network Camera is a high-performance camera designed for surveillance and security applications. It features a powerful image sensor, H.264 video compression, and a wide range of features to provide clear and reliable images in a variety of environments. It can be used for monitoring indoor and outdoor areas. The camera offers several features such as a wide viewing angle, PTZ (Pan Tilt Zoom) capability, motion detection, and support for various protocols. It can be integrated with other security systems and can be accessed remotely via a web browser or a mobile app.

PDF

Document

Key features

High-performance image sensor
H.264 video compression
Wide range of features
Wide viewing angle
PTZ (Pan Tilt Zoom) capability
Motion detection
Support for various protocols
Remote access

Frequently asked questions

To access the camera from the internet, you need to configure your network router to allow incoming data traffic to the camera. This can be done by enabling the NAT-traversal feature. See NAT traversal (port mapping) for IPv4 on page 50 for more information.

The manual trigger can be used to validate actions during product installation and configuration. To configure the manual trigger, go to Setup > Events > Add Input Signal > Manual Trigger and select the desired action.

The default administrator user name is 'root'. It is permanent and cannot be deleted. The root password can be set via a standard HTTP connection or an encrypted HTTPS connection.

To upgrade the firmware, you can download the latest firmware from the Axis website and upload it to the camera through the web interface. See Upgrade the Firmware on page 58 for more information and instructions.