Exporting the Serial Number to the SD Card. Spectrum DX6

Spectrum DX6 is a powerful and versatile 6-channel transmitter that is perfect for a wide range of RC models. It features a user-friendly interface, advanced programming capabilities, and a variety of built-in telemetry functions. With its intuitive design and powerful features, the Spektrum DX6 is the perfect choice for both experienced and novice RC pilots.

PDF

Document

SYSTEM SETUP

Serial Number

 

The Serial Number screen displays the transmitter serial number and AirWare software version.

Reference the Serial Number screen any time you need to register your transmitter or update the AirWare software from the Spektrum

Community website.

Exporting the Serial Number to the SD Card

You may find it helpful to export the transmitter serial number to a text file for your personal records or when you are registering the transmitter on the Spektrum Community.

To export the transmitter serial number:

1. Insert an SD Card in the card slot on the transmitter.

2. Scroll to EXPORT and press the scroll wheel. The SD Status screen appears and should display MY_DX6.xml in the middle of the screen.

3. Press the scroll wheel again to return to the Serial Number screen.

4. Power off the transmitter and remove the SD Card from the transmitter.

5. Install the SD Card in a card reader connected to your computer.

6. Open the MY_DX6.xml file from the SD Card location. You can then copy and paste the serial number into your personal records or to the Spektrum Community website.

 

Locating the Transmitter AirWare Software Version

The transmitter AirWare software version appears between PREV and NEXT at the bottom of the Serial Number screen. Register your DX6 to get AirWare software updates and other news at spektrumrc.com

IMPORTANT: AirWare files are specific to the transmitter serial number and you cannot transfer AirWare files between transmitters, ie., downloading an AirWare software update once and attempting to install it on multiple transmitters.

 

CALIBRATE



The Calibration screen stores the potentiometer endpoints for all proportional controls. It is mandatory to complete the calibration after changing the stick mode selection.

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from left to right, then up and down. Press gently on the gimbals at the stops to achieve an accurate calibration. Return both gimbal sticks to the center position.

2. Select SAVE to store the calibration.



SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL 25

Key features

5 Airplane flight modes
Virtually Unlimited Model Memory (250 models)
Wireless trainer
Selectable sound menu
Voice alerts for telemetry, warnings, and other conditions
'Roll' to telemetry screens without entering the Settings menu
Switch between Function List and System Settings menus without powering off the transmitter