CIKTEL MC600S Television User Guide

MC600S GUIDE
---- 2.22.58R
It looks like
Connect TV Box
Remote Control
Directly entry ATOP EPG when STB powers on
Main page
About Page
App store Page
How to do “Factory Reset”
If TV BOX can display Main page after power on, but it has some
other issues, we can try “Factory Reset” to resolve issues.
This wipes saved user data, formats internal storage and resets TV
BOX to factory settings. The firmware version will keep same as
before doing “Factory Reset”
Go to Settings  About Page, and choose “Factory reset”
How to do “HARD RESET”
If TV BOX can’t work after power on, for example, freezing on the
AD page, black screen with no signal. We can try “HARD RESET”
way to resolve issue. After “HARD RESET”, TV BOX will wipe user
data, format internal storage and reset to factory firmware version
1. Unplug the TV BOX from the power source
2. Locate the ‘Settings’ button on the Remote Control
3. Connect the TV BOX to power and at once press and release
button continuous many times until a following picture displayed
on the screen. This will put the TV BOX in ‘Hard reset’ Mode
4. Scroll down and select: Back to factory img, and confirm by press
“OK” button. TV BOX will reboot after Reset.
Turn on/off TV box remotely
User can easily turn on/off TV BOX instead of press power button
on TV BOX
1. Turn on TV BOX: Press
on Remote control when TV BOX is
off status
2. Turn off TV BOX: Press
“Power off”
on Remote control, then choose
">